A Multi-Function Monitor is designed to detect the working environment of the press dies. Its function include material mistransmission, product pass-through, position confirmation, squeeze type molded packing, end edge of material and Air-gap rising. Hence it can be applied to protect dies and mechanism, and eliminate defects during producing.

◎Stamping Die Computerized slug detector(SD-401/402)

Product Features

SD-401-One basic unit, Single output device (Single Port)

SD-402-One basic unit, Dual output device (Dual Ports)

1. Sensor operation setup distance: Location(A)from 0.8mm to 1.2mm,please press setup switch thereafter 199-0 displayed ,Move the iron block of the sensor head ,it can be adjusted to 80~120 as operation distance. (Meaning 0.8mm to 1.2mm ) Press setup switch again after set-up process.

2. Operation of monitoring value setup: Accuracy range set up from ±1μm~±99μm,depends on your exact accuracy requirement.

3. While stamping die starts running, the first four times displaying digits meaning the average of the die-height testing.(It will be re-calculated while stamping machine power off or the sensor line out of the basic unit and re-plug-in).

4. Self-Check functions available.

5. This product provides precision set-up value as 1μm, it is selectable against different accurate toolings.

6. Options available for Error-Carry-On, Missing material (by Electro-Eyes sensor) and Material Jammed (By sensoring Bar)

Specifications：